One phenomenon still exists today, that is, in order to put electrical products into the European market as a whole, electrical manufacturers at all costs, the same electrical products apply for certification in many European countries, such as VDE, KEMA-KEUR, NF, IMQ, DEMKO. This is time-consuming and expensive. Thus, similar to CE, ENEC authentication arises at the historic moment. ENEC is the acronym for EUROPEAN NORMS ELECTRICAL CERTIFICATION, meaning European Standard Electrical Certification.
The ENEC logo indicates that the relevant European standards are attached and the ENEC certificate can be issued by the official testing agency of the member states of CCA? CENELEC (European Electrotechnical Commission) CERTIFICATION AGREEMENT? ENEC certification is recognized by the signatories of CCA countries and may replace the security certification of European countries in the future.
The ENEC logo implies safety because it is based not only on type tests performed by qualified certification bodies, but also on continuous control of the manufacturer's production process. In addition, the use of the ENEC logo is monitored by European producers and consumer organizations and official testing agencies.
Compared with the original authentication method, the advantages of ENEC authentication are obvious:
1. Completing a test and certification process leads to the certification (ENEC) required to enter the entire European market, thus saving a lot of time and cost.
2. The universal use of ENEC has extended from EU (European Community) and EFTA (European Free Trade Association) countries to Eastern European countries.
3. Choosing a certification authority can obtain the required (complete) certification (ENEC), thus reducing the certification process.
4., it can be freely chosen among numerous certification bodies.
5. a certification contract can replace the original certification contracts.
This sign is not mandatory. It is customer-oriented.
ENEC (European Norms Electrical Certification) is a certification scheme of CENELEC (European Commission for Electrical Standardization) for lighting and related parts, electrical and electronic office and information technology equipment, safety insulation and separate transformers, power supplies and switches for household appliances, etc. Products.
ENEC is a voluntary label and can be used as a substitute for individual labels in European countries to prove that the product has passed third-party testing to confirm compliance with European standards (ENs). The ENEC logo implies safety because it is based not only on type tests performed by qualified certification bodies, but also on continuous control of the manufacturer's production process. In addition, the use of the ENEC logo is monitored by European producers and consumer organizations and official testing agencies.
Now the European standard listed in Appendix B of the ENEC agreement has been increasing. And the ENEC logo, which was originally allowed to be used only by European manufacturers, began to be open to all manufacturers around the world.
ENEC logo instructions - The number appearing on the right of the ENEC logo identifies different CCA member states (note: different numbers represent different member states / certification bodies, such as 10 for VDE). There are now 21 member states and 23 certification bodies. If the manufacturer wishes, the logo of the certification authority can also be added.
Certification bodies and ENEC Code:
Code
Certification body
Code
Certification body
01
AENOR
Fourteen
Intertek Semko
02
SGS Belgium - Division SGS CEBEC
Fifteen
UL International Demko
03
IMQ
Sixteen
SGS Fimko
04
CERTIF
Seventeen
NEMKO
05
KEMA
Eighteen
MEEI
07
SNCH
Nineteen
ITCL
08
LCIE
Twenty-one
EZ
09
ELOT
Twenty-two
SIQ
Ten
VDE
Twenty-three
TSE
Eleven
OVE
Twenty-four
TRLP
Twelve
BSI
Twenty-five
T V S D PS
Thirteen
Electrosuisse
Thirty
PREDOM-OBR
E/e sign
European requirements for vehicle safety certification and Safety-related parts and systems are embodied in the E-mark and E-MARK certification.
E logo authentication.
The E-mark originates from the Regulations promulgated by the Economic Commission of Europe (ECE). At present, the ECE includes 28 European countries, including East and Southern European countries in addition to EU member states. Usually ECE members are willing to receive test reports and certificates that conform to ECE regulations. E-mark certificate refers to the products are parts and system components, there is no vehicle certification of the corresponding regulations, the E-mark certification products, is accepted by the market. The executing agencies of E logo authentication are generally the technical service organizations of ECE member countries. The issuing authority of the E certificate is the government department of the ECE member country, and the certificates of each country have corresponding numbers.
E1
Germany
E2
France
E3
Italy
E4
Netherlands
E5
Sweden
E6
Belgium
E7
Hungary
E8
Czech
E9
Spain
E10
Yugoslavia
E11
Britain
E12
Austria
E13
Luxembourg
E14
Switzerland
E16
Norway
E17
Finland
E18
Denmark
E19
Romania
E20
poland
E21
Portugal
E22
Russia
E23
Greece
E25
Croatia
E26
Slovenia
E27
Slovakia
E28
Belarus
E29
Estonia
E31
Bosnia and Herzegovina
E37
Turkey
E sign is a certification mark for motor vehicles, safety parts and systems that the European Commission compels Member States to use in accordance with EU directives. The testing agency must be a technical service agency within the EU member states, and the license issuing agency is the government Transport Department of the EU member states. European Union Member States will be recognized for obtaining e logo certification. Like the E logo certification, the certificate of each member country has the corresponding number:
E1
Germany
E2
France
E3
Italy
E4
Netherlands
E5
Sweden
E6
Belgium
E9
Spain
E11
Britain
E12
Austria
E13
Luxembourg
E17
Finland
E18
Denmark
E21
Portugal
E23
Greece
E24
Ireland
For most of the automotive electronic products, the technology of E/e mark is essential.